Basler A400K Manual do Utilizador Página 18
- Página / 130
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Specifications, Requirements, and Precautions AW00118501000
10 Basler racer Camera Link
1.8 Precautions
NOTICE
Avoid dust on the sensor.
The camera is shipped with a protective plastic seal on the camera front or lens mount. To avoid
collecting dust on the camera’s sensor, make sure that you always put the protective seal in place
when there is no lens mounted on the camera.
Also, make sure to always point the camera downward when there is no protective seal or lens
on the camera front or lens mount.
NOTICE
Applying incorrect power can severely damage the camera.
1. If you supply camera power as Power over Camera Link (PoCL):
You must supply camera power in accordance with the Power over Camera Link (PoCL)
specifications in the Camera Link standard.
You must use a PoCL compliant frame grabber.
You must use Camera Link cables that are specifically designed for PoCL as specified in
the Camera Link standard.
2. If you supply camera power via the 6-pin receptacle:
You must supply camera power with the correct voltage: The camera‘s required nominal
operating voltage is +12 VDC (±10 %), < 1% ripple, effective on the camera‘s connector.
You must supply camera power with the correct polarity.
You must avoid a voltage drop: If you supply camera power via a long cable a voltage
drop can occur. We recommend that you provide +12 VDC separately through the wires
connecting to pins 1 and 2 of the receptacle. We also recommend that you provide ground
separately to the wires connecting to pins 5 and 6.
- Basler racer 1
- Table of Contents 5
- 7 Pixel Formats and 6
- Basler racer Camera Link iii 7
- 1.1 Models 9
- 1.2 General Specifications 10
- 1.3 Spectral Response 11
- 1.4 Mechanical Specifications 12
- 1.4.2 Lens Adapter Dimensions 14
- Basler racer Camera Link 7 15
- 8 Basler racer Camera Link 16
- 1.7.2 Heat Dissipation 17
- 1.8 Precautions 18
- Basler racer Camera Link 11 19
- Warranty Precautions 20
- 2 Software and Hardware 21
- Installation 21
- 14 Basler racer Camera Link 22
- 3 Tools for Changing Camera 23
- Parameters 23
- 3.1.1 The pylon Viewer 24
- 3.1.2 The pylon API 24
- Basler racer Camera Link 17 25
- 18 Basler racer Camera Link 26
- 4 Camera Functional 27
- Description 27
- 5 Physical Interface 29
- 5.2.1 6-pin Receptacle 30
- 5.2.2 26-pin SDR Connectors 30
- 5.3 Connector Types 33
- 5.4 Cabling Requirements 34
- 5.4.2 Camera Link Cables 35
- 5.5 Camera Power 36
- Connector 37
- 5.5.3 LED Indicator 38
- 5.6.1 Inputs 39
- 5.6.1.2 Input Line Inverters 41
- the Line Start Trigger 42
- 5.6.2 Outputs 43
- 5.6.2.2 Output Line Inverters 45
- Basler racer Camera Link 41 49
- 6 Acquisition Control 51
- Exposure Time Control 52
- Basler racer Camera Link 45 53
- Basler racer Camera Link 47 55
- // rate internally 55
- 6.1.4.1 Introduction 56
- (duration determined by the 57
- Basler racer Camera Link 51 59
- 6.1.5.1 Introduction 60
- Timed exposure mode 61
- Trigger width exposure mode 61
- Trigger Width Exposure Mode 63
- 6.2 Frequency Converter 67
- 60 Basler racer Camera Link 68
- Basler racer Camera Link 61 69
- the exposure active signal 70
- 6.3.2 Acquisition Status 71
- Basler racer Camera Link 65 73
- 6.4 Maximum Allowed 74
- Line Acquisition Rate 74
- Basler racer Camera Link 67 75
- Basler racer Camera Link 69 77
- 70 Basler racer Camera Link 78
- Tap Geometries 79
- 7.2 Camera Link Tap Geometry 81
- 8 Features 83
- 76 Basler racer Camera Link 84
- 8.2 Gain and Black Level 85
- 8.2.1.1 Analog Gain 86
- 8.2.1.2 Digital Gain 87
- 80 Basler racer Camera Link 88
- // Set Gain Digital All 88
- 8.2.2 Black Level 89
- 8.3 Remove Parameter Limits 90
- 8.4.1 Setting the Image AOI 91
- Basler racer Camera Link 85 93
- 8.5 Luminance Lookup Table 94
- Using Basler pylon 96
- Using Direct Register Access 96
- 8.6 Binning 97
- 8.7 Gamma Correction 98
- Basler racer Camera Link 91 99
- 8.8 Shading Correction 100
- User Shading Set File 101
- Features AW00118501000 102
- 94 Basler racer Camera Link 102
- AW00118501000 Features 103
- Basler racer Camera Link 95 103
- 96 Basler racer Camera Link 104
- Basler racer Camera Link 97 105
- 8.9 Error Detection 106
- 8.9.2 Error Codes 107
- 8.10 Test Images 109
- 8.10.1 Test Images in Detail 110
- Basler racer Camera Link 103 111
- 8.12 User Defined Values 115
- 8.13 Configuration Sets 116
- Default Startup Set 117
- Set into the Active Set 118
- 112 Basler racer Camera Link 120
- 9 Troubleshooting and Support 121
- 9.3 Before Contacting Basler 122
- Technical Support 122
- 116 Basler racer Camera Link 124
- Revision History 125
- 118 Basler racer Camera Link 126
- AW00118501000 Index 127
- Basler racer Camera Link 119 127
- Index AW00118501000 128
- 120 Basler racer Camera Link 128
- Basler racer Camera Link 121 129
- 122 Basler racer Camera Link 130
Manuais e produtos relacionados com Câmaras bridge Basler A400K
Câmaras bridge Basler A400K Manual do Utilizador
(242 páginas)
(242 páginas)
Câmaras bridge Basler SCOUT LIGHT Manual do Utilizador
(228 páginas)
(228 páginas)
Câmaras bridge Basler A101f Manual do Utilizador
(66 páginas)
(66 páginas)
Câmaras bridge Basler A102f Manual do Utilizador
(120 páginas)
(120 páginas)
Câmaras bridge Basler raL2048-48gm Manual do Utilizador
(238 páginas)
(238 páginas)
Câmaras bridge Basler SCOUT LIGHT Manual do Utilizador
(166 páginas)
(166 páginas)
Câmaras bridge Basler Camera Manual do Utilizador
(11 páginas)
(11 páginas)
Câmaras bridge Basler A101f Manual do Utilizador
(46 páginas)
(46 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais