Basler A400K Manual do Utilizador descarregar pdf (Página 17)

Specifications, Requirements, and Precautions

Basler aviator Camera Link 9

1.4.4 Mechanical Stress Test Results

Aviator cameras were submitted to an independent mechanical testing laboratory and subjected to

the stress tests listed below. The mechanical stress tests were performed on selected camera

models. After mechanical testing, the cameras exhibited no detectable physical damage and

produced normal images during standard operational testing.

The mechanical stress tests were performed with a dummy lens connected to a C-mount. The

dummy lens was 35 mm long and had a mass of 66 g. Using a heavier or longer lens requires an

additional support for the lens.

Test Standard Conditions

Vibration

(sinusoidal, each axis)

DIN EN 60068-2-6 10-58 Hz / 1.5 mm_58-500 Hz / 20 g_1 Octave/Minute

10 repetitions

Shock (each axis)

DIN EN 60068-2-27 20 g / 11 ms / 10 shocks positive

20 g / 11 ms / 10 shocks negative

Bump (each axis)

DIN EN 60068-2-29 20 g / 11 ms / 100 shocks positive

20 g / 11 ms / 100 shocks negative

Vibration

(broad-band random,

digital control, each axis)

DIN EN 60068-2-64 15-500 Hz / 0.05 PSD (ESS standard profile) / 00:30 h

Table 1: Mechanical Stress Tests

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 193 194

Sem comentários

Basler A400K Manual do Utilizador Página 17