Basler BIP2-DXXXXc-dn Guia de Instalação descarregar pdf (Página 15)

AW00101404000 Installation Guide

Basler IP Fixed Dome Cameras 13

EnglishLanguageLanguageLanguageLanguageLanguageLanguageLanguage

4. For the connection to be weather proof, the cables must fit snugly in the

grommet's grooves. Check now and make sure that the cables fit snugly in

the grooves. If the cables are a loose fit:

a. Remove the grommet.

b. Increase the diameter of the cables where they will pass through the

grooves in the grommet by wrapping several layers of high quality

plastic tape around each cable.

c. Reapply the grommet to the cable and check the cables for a snug fit in

the grooves.

5. Route the cable ends through the hole in the center of the nipple as shown

below.

6. Continue pulling the cables through the hole until the grommet contacts

the nipple and then press the grommet into the hole in the center of the

nipple.

Nipple

Grommet

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 88 89

Comentários a estes Manuais

Sem comentários